Monitor/Panel Options; 5Accli01.Sdl0-000 - B&R Automation PC 2200 User Manual

Technical data

2.3.3 Monitor/Panel options

Information:
Monitor/Panel options can only be installed and replaced at the B&R factory.

2.3.3.1 5ACCLI01.SDL0-000

2.3.3.1.1 General information
Monitor/Panel option 5ACCLI01.SDL0-000 is equipped with an interface to connect panels via SDL or DVI.
• SDL/DVI interface
• Compatible with APC2100 and APC2200
2.3.3.1.2 Order data
Model number Short description
Monitor/Panel options
5ACCLI01.SDL0-000 Monitor/Panel option - 1x SDL/DVI transmitter - For APC2100/
APC2200 - Only available with a new device
2.3.3.1.3 Technical data
Information:
The following specified characteristic data, features and limit values are only valid for this accessory
and may differ from those of the complete system. The data specified for the complete system applies
to the complete system in which this accessory is installed, for example.
Model number
General information
B&R ID code
Certifications
CE
UL
HazLoc
DNV GL
Interfaces
Panel/Monitor interface
3)
Design
Type
Electrical characteristics
Power consumption
Environmental conditions
Temperature
Operation
Storage
Transport
60
Table 41: 5ACCLI01.SDL0-000 - Order data
Table 42: 5ACCLI01.SDL0-000 - Technical data
Automation PC 2200 User's manual V 1.05 Translation of the original documentation
5ACCLI01.SDL0-000
0xE6B6
Yes
cULus E115267
Industrial control equipment
cULus HazLoc E180196
Industrial control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T4
Temperature: B (0 - 55 °C)
Humidity: B (up to 100%)
Vibration: A (0.7 g)
EMC: B (bridge and open deck)
DVI-I
SDL/DVI/RGB (SDL/DVI/RGB)
1 W
-20 to 60°C
4)
-20 to 60°C
-20 to 60°C
Figure
1)
2)