Battery Compartment; 5Accbt01.0000-001 - B&R Automation PC 2200 User Manual

2.3.6 Battery compartment

2.3.6.1 5ACCBT01.0000-001

2.3.6.1.1 General information
The lithium battery is needed to retain BIOS CMOS data and to back up the real-time clock (RTC).
The battery is subject to wear and must be replaced if the battery capacity is insufficient (state "Bad").
2.3.6.1.2 Order data
Model number Short description
Accessories
5ACCBT01.0000-001 Battery compartment - Dark gray - Includes battery - For
APC2200/PPC2200
For the battery compartment replacement part, see
parts".
2.3.6.1.3 Technical data
Model number
General information
Battery
Type
Service life
Removable
Design
Certifications
CE
UL
Operating conditions
Pollution degree per EN 61131-2
Environmental conditions
Temperature
Operation
Storage
Transport
Relative humidity
Operation
Storage
Transport
Mechanical characteristics
Housing
Material
Weight
1) At 50°C, 6 µA for the components being supplied.
2) The battery is permanently installed in the battery compartment and cannot be replaced. The entire battery compartment must always be replaced.
Automation PC 2200 User's manual V 1.05 Translation of the original documentation
Table 165: 5ACCBT01.0000-001 - Order data
"5ACCRPC2.0003-000" on page 216
Table 166: 5ACCBT01.0000-001 - Technical data
5ACCBT01.0000-001
Panasonic 1000 mAh
8 years
1)
No
2)
Lithium
Yes
cULus E115267
Industrial control equipment
Pollution degree 2
-25 to 60°C
-25 to 60°C
-25 to 60°C
5 to 90%
5 to 95%
5 to 95%
Gray (similar to Pantone 432C) plastic
Approx. 13 g
Technical data
Figure
in section "Replacement
121