Power - B&R Automation PC 2200 User Manual

Software

4.1.6.4 Power

BIOS parameter
CPU configuration
Wake on PME
Wake on RTC from S5
Wake from S5 time
Day of month
Wake from S5 after (seconds)
4.1.6.4.1 CPU configuration
BIOS parameter
VTX-2
VT-d
TM1
AES-NI
DTS
156
Figure 50: Power
Setting options Description
Enter Opens submenu
Disabled Disables/Enables wake on PME
Enabled
Disabled Disables wake from S5, daily, on a certain day of the month, after a certain sleep time
or by operating system utility
By every day
The configuration for waking by OS utility must be made in the operating system.
By day of month
By sleep time
By OS utility
Arrow keys and F5/F6 Defines the time for wake from S5 by every day [hh:mm:ss]
or +/- (numeric key- [hh] range: 0 to 23
pad) [mm] and [ss] range: 0 to 59
INT Defines the day of the month for waking from S5 by day of month
Default: 1 Range: 1 to 31
INT Defines the timer for waking from S5 by sleep time [s]
Default: 5 Range: 5 to 255
Table 192: Power
Setting options Description
Disabled Disables/Enables VTX-2
Enabled
Disables/Enables Intel Virtualization Technology for Directed I/O
Disabled
Enabled
Disabled Disables/Enables thermal monitoring 1
The CPU load is reduced by additional idle cycles to control the CPU temperature.
Enabled
Disabled Disables/Enables the Advanced Encryption Standard
Enabled
Disabled Disables/Enables digital thermal sensors
Table 193: Power - CPU configuration
Automation PC 2200 User's manual V 1.05 Translation of the original documentation
"CPU configuration" on page 156