Organization Of Notices; Guidelines - B&R Automation PC 2200 User Manual

1.3 Organization of notices

Safety notices
Contain only information that warns of dangerous functions or situations.
Signal word
Danger!
Warning!
Caution!
Notice!
General notices
Contain useful information for users and instructions for avoiding malfunctions.
Signal word
Information:

1.4 Guidelines

European dimension standards apply to all dimension diagrams.
All dimensions in mm.
Unless otherwise specified, the following general tolerances apply:
Nominal dimension range
Up to 6 mm
Over 6 to 30 mm
Over 30 to 120 mm
Over 120 to 400 mm
Over 400 to 1000 mm
Table 4: Nominal dimension ranges
Automation PC 2200 User's manual V 1.05 Translation of the original documentation
Description
Failure to observe these safety guidelines and notices will result in death, severe injury or substantial damage to property.
Failure to observe these safety guidelines and notices can result in death, severe injury or substantial damage to property.
Failure to observe these safety guidelines and notices can result in minor injury or damage to property.
Failure to observe these safety guidelines and notices can result damage to property.
Table 2: Organization of safety notices
Description
Useful information, application tips and instructions for avoiding malfunctions.
Table 3: Organization of general notices
General tolerance per
DIN ISO 2768 medium
±0.1 mm
±0.2 mm
±0.3 mm
±0.5 mm
±0.8 mm
General information
11