Installing The Cable Strain Relief Clip - B&R Automation PC 2200 User Manual

Commissioning

3.1.4 Installing the cable strain relief clip

1. Position the cable strain relief clip on the APC2200 as shown in the following figure and secure it with the
supplied locating screw.
The length overhang is not permitted to be removed, and the cable strain relief clip is not permitted to be
installed elsewhere on the device.
2. The connectors of the connected USB cables must be secured to the cable strain relief clip using the supplied
cable ties.
126
Figure 32: Installing the cable strain relief clip
Figure 33: Securing USB cables
Automation PC 2200 User's manual V 1.05 Translation of the original documentation