Device Interfaces And Slots; Device Interfaces - Overview - B&R Automation PC 2200 User Manual

Technical data

2.2.6 Device interfaces and slots

2.2.6.1 Device interfaces - Overview

The interfaces are located on the top of the Automation PC 2200.
Figure 22: Device interfaces - Overview with installed interface and monitor/panel option
No. Interface name
1 Power 24 VDC
2 Functional ground connection
3 USB2
4 USB1
5 Power button
6 Power, CFast, Link, Run
7 ETH2
8 CFast
1) Only available with installed interface option.
2) Only available with installed monitor/panel interface.
38
"+24 VDC power supply"
"Grounding"
"USB interfaces"
"USB interfaces"
"Power button"
"LED status indicators"
"Ethernet 2 interface (ETH2)"
"CFast slot"
Automation PC 2200 User's manual V 1.05 Translation of the original documentation
No. Interface name
9 Reset button
10 ETH1
11 Off/On
12 L1, L2, L3
13 IF option
(configuration-dependent)
14 Monitor/Panel interface
(configuration-dependent)
15 Screw point for cable shield
16 Battery compartment on the
underside
"Reset button"
"Ethernet 1 interface (ETH1)"
"Terminating resistor"
1)
"LED status indicators L2, L3" on page
88
"LED status indicators L1, L2, L3" on page
100
1)
"IF option slot"
1)
"Monitor/Panel interface"
2)
-
"Battery compartment"