Ethernet 1 Interface (Eth1); Ethernet 2 Interface (Eth2) - B&R Automation PC 2200 User Manual

Technical data

2.2.6.3 Ethernet 1 interface (ETH1)

This Ethernet controller is integrated in the system unit and routed externally.
Controller
Wiring
Transfer rate
Cable length
LED "Speed"
Green
Orange (dark)
LED "Link"
Orange (light) Link (a connection to an
Ethernet network exists)
1) The interfaces, etc. available on the device or module have been numbered for the purpose of clear differentiation. This numbering may deviate from the
numbering used by the respective operating system, however.
2) Switching takes place automatically.
3) The 10 Mbit/s transfer rate / connection is only available if LED "Link" is active at the same time.
A special driver is required to operate the Ethernet controller. Drivers for approved operating systems are available
for download in the Downloads section of the B&R website (www.br-automation.com).
Information:
Necessary drivers must be downloaded from the B&R website, not from manufacturer websites.

2.2.6.4 Ethernet 2 interface (ETH2)

This Ethernet controller is integrated in the system unit and routed externally.
Controller
Wiring
Transfer rate
Cable length
LED "Speed"
Green
Orange (dark)
LED "Link"
Orange (light) Link (a connection to an
Ethernet network exists)
1) The interfaces, etc. available on the device or module have been numbered for the purpose of clear differentiation. This numbering may deviate from the
numbering used by the respective operating system, however.
2) Switching takes place automatically.
3) The 10 Mbit/s transfer rate / connection is only available if LED "Link" is active at the same time.
A special driver is required to operate the Ethernet controller. Drivers for approved operating systems are available
for download in the Downloads section of the B&R website (www.br-automation.com).
Information:
Necessary drivers must be downloaded from the B&R website, not from manufacturer websites.
40
Ethernet 1 interface (ETH1
Intel I210
S/STP (Cat 5e)
10/100/1000 Mbit/s
2)
Max. 100 m (min. Cat 5e)
On Off
100 Mbit/s 10 Mbit/s
1000 Mbit/s
On Off
Activity (blinks) (data
is being transferred)
Table 24: Ethernet interface (ETH1)
Ethernet 2 interface (ETH2
Intel I210
S/STP (Cat 5e)
10/100/1000 Mbit/s
2)
Max. 100 m (min. Cat 5e)
On Off
100 Mbit/s 10 Mbit/s
1000 Mbit/s
On Off
Activity (blinks) (data
is being transferred)
Table 25: Ethernet interface (ETH2)
Automation PC 2200 User's manual V 1.05 Translation of the original documentation
)
1)
LED "Link"
3)
-
)
1)
LED "Link"
3)
-
RJ45 connector, female
1
LED "Speed"
RJ45 connector, female
1
LED "Speed"