B&R Automation Device Interface (Adi) Control Center; Functions - B&R Automation PC 2200 User Manual

Software
4.5 B&R Automation Device Interface (ADI) Control Center
The Automation Device Interface (ADI) allows access to specific functions of B&R devices. The settings of these
devices can be read out and changed in Windows using the B&R Control Center in the Control Panel.
Information:
The displayed temperature and voltage values (e.g. CPU temperature, core voltage, battery voltage)
represent uncalibrated information values. No conclusions about possible alarms or hardware mal-
functions can be drawn from this. The hardware components used have automatic diagnostic func-
tions in the event of error.

4.5.1 Functions

Information:
The functions available in the Control Center depend on the device family.
• Changing display-specific parameters
• Reading out device-specific keys
• Updating the key configuration
• Testing keys or device-specific LEDs of a membrane keypad
• Reading out control devices (e.g. key switch, handwheel)
• Reading out temperatures, fan speeds and statistical data
• Reading out operating hours (power-on hours)
• Reading user settings and factory settings
• Reading software versions
• Updating and backing up firmware
• Creating reports for the current system (support)
172
Figure 56: B&R Control Center screenshots - Examples
Automation PC 2200 User's manual V 1.05 Translation of the original documentation