5Accif03.Ceth-000 - B&R Automation PC 2200 User Manual

Technical data

2.3.4.10 5ACCIF03.CETH-000

2.3.4.10.1 General information
Interface option 5ACCIF03.CETH-000 is equipped with 2 10/100/1000BASE-T Ethernet interfaces.
• 2x 10/100/1000BASE-T Ethernet interface
• Compatible with APC2200/PPC2200
2.3.4.10.2 Order data
Model number Short description
Interface options
5ACCIF03.CETH-000 Interface card - 2x ETH 10/100/1000 interface - For APC2200/
PPC2200 - Only available with a new device
2.3.4.10.3 Technical data
Information:
The following specified characteristic data, features and limit values are only valid for these individual
components and may differ from those of the complete system. The data specified for the complete
system applies to the complete system in which this individual component is used, for example.
Model number
General information
B&R ID code
Diagnostics
Data transfer
Certifications
CE
UL
Interfaces
Ethernet
Quantity
Controller
Design
Transfer rate
Cable length
Electrical characteristics
Power consumption
Operating conditions
Pollution degree per EN 61131-2
Environmental conditions
Temperature
Operation
Storage
Transport
Relative humidity
Operation
Storage
Transport
Mechanical characteristics
Weight
1) Switching takes place automatically.
2) For detailed information, see the temperature tables in the user's manual.
2.3.4.10.3.1 ETH3 and ETH4 - Pinout
LEDs are integrated on the interface option. The ETH interfaces on the system unit are referred to as IF options.
118
Table 160: 5ACCIF03.CETH-000 - Order data
Max. 100 m between two stations (segment length)
Table 161: 5ACCIF03.CETH-000 - Technical data
Automation PC 2200 User's manual V 1.05 Translation of the original documentation
Figure
5ACCIF03.CETH-000
F1A8
Yes, using LED status indicator
Yes
cULus E115267
Industrial control equipment
2
Intel I210
RJ45, shielded
10/100/1000 Mbit/s
1)
2 W
Pollution degree 2
0 to 60°C
2)
-20 to 60°C
-20 to 60°C
5 to 90%, non-condensing
5 to 95%, non-condensing
5 to 95%, non-condensing
Approx. 25 g