Servicing/Maintenance
7.2 Changing the battery
The following instructions apply to battery compartments 5ACCBT01.0000-001 and 5ACCRPC2.0003-000.
1. Disconnect the power supply cable to the B&R industrial PC (disconnect the power cable).
2. Carry out electrostatic discharge on the housing or at the ground connection.
3. Pull out and remove the battery compartment.
4. Replace the new battery compartment.
5. Reapply power to the B&R industrial PC (connect the power cable).
6. Reset the date and time.
Warning!
Lithium batteries are hazardous waste. Used batteries must be disposed of in accordance with local
regulations.
218
Figure 89: Changing the battery
Automation PC 2200 User's manual V 1.05 Translation of the original documentation