Installing The Automation Pc - B&R Automation PC 2200 User Manual

Commissioning

3.1.2 Installing the Automation PC

The Automation PC 2200 is installed using two M5 screws, which are not included in delivery.
The Automation PC 2200 offers two different installation options:
Mounting plate on the back (book style)
The devices are installed with the mounting holes located on the mounting plate. The mounting holes are designed
for M5 screws.
For the exact position of the mounting holes, see section
1. Provide the mounting surface with the necessary holes. For the exact position of the mounting holes, see
the drilling templates.
2. Install the B&R industrial PC with M5 screws.
124
Mounting plate on the right side (box style)
ø 5.5
ø 11
Figure 29: Mounting hole
"Drilling template" on page
Automation PC 2200 User's manual V 1.05 Translation of the original documentation
22.