Boot - B&R Automation PC 2200 User Manual

Software

4.1.6.5 Boot

BIOS parameter
Boot type
Quick boot
Quiet boot
Network stack
PXE boot capability
Power up in standby support
Add boot options
ACPI selection
2)
USB boot
EFI device first
158
Figure 51: Boot
Setting options Description
Selects the boot type
Dual boot type
In dual boot mode, both UEFI and Legacy boot are possible and the CSM
Legacy boot type
In Legacy boot mode, the CSM is enabled.
UEFI boot type
In UEFI boot mode, the CSM is disabled.
Disabled Disables/Enables quick boot
If quick boot is enabled, certain tests are not performed so the boot process is faster.
Enabled
Disabled Disables/Enables booting in text mode
Enabled
Disabled Disables/Enables the network stack
Enabling makes ETH booting possible.
Enabled
Disabled Disables PXE boot or selects the mode
UEFI:IPV4
UEFI:IPV6
UEFI:IPV4/IVP6
Legacy
Disabled Disables/Enables power up in standby support
Enabled
Selects or changes the mode of arrangement in the boot order for newly added devices.
Auto
Manual mode is not fully UEFI compatible.
First
Manual
Last
Acpi1.0B Selects the ACPI mode
Acpi3.0
Acpi4.0
Acpi5.0
Acpi6.0
Acpi6.1
Disabled Disables/Enables USB boot
Enabled
Disabled Disables/Enables EFI device first
Table 195: Boot
Automation PC 2200 User's manual V 1.05 Translation of the original documentation
is enabled.
1)