Evaluation With Burnintest From Passmark - B&R Automation PC 2200 User Manual

3.7.2.2 Evaluation with BurnInTest from PassMark

If a separate application is not created or used for temperature evaluation, B&R recommends using the BurnInTest
software tool from PassMark.
The BurnInTest software tool is available in standard and professional versions. In addition to the software package,
various loopback adapters (serial, parallel, USB, etc.) and test CDs or DVDs are also available. Depending on the
expansion level of the software and available loopback adapters, a correspondingly high system and peripheral
load can be generated.
Information:
Loopback adapters are also available from PassMark. For more information, see www.passmark.com.
The following screenshots refer to PassMark BurnInTest Pro V8.1 using an APC2200 without IF options.
Figure 40: Settings for PassMark BurnInTest Pro V8.1 using an APC2200 without IF options
Automation PC 2200 User's manual V 1.05 Translation of the original documentation
Commissioning
133