Personal Protective Equipment; Obligations Of The Machine End-User - Bosch Rexroth WS200 Operating Instructions Manual

2.7

Personal protective equipment

The personal protective equipment for users of the product consists of:
• Safety shoes during the entire teaching
• Protective gloves and eye protection during the set-up and operation of the hydraulic
training circuits
All parts of the personal protective equipment must be in full working order.
2.8

Obligations of the machine end-user

The machine end-user has to guarantee the required prerequisites for the set-up and
the installation of the WS200 work station and
• ensure a safe set-up by their personnel and/or the persons authorized by them; in this
respect, they pay particular attention to that the ground
• is sufficiently load bearing and
• even and horizontal;
• ensure that the accident prevention regulations, the safety regulations of the professional
unions as well as further internal and local requirements are observed.
They instruct their employees and/or those of third party companies on possible dangers at
the place of installation.
The machine end-user has to make available sufficient lighting at the place of set-up of
the work station.
They have to provide for personnel training on the following subjects on a regular basis:
• observation and use of the operating instructions and the legal regulations;
• intended operation of the work station;
• observation of the instructions from the factory security offices as well as the machine
end-user's operating instructions;
• behavior in case of emergency.
Safety instructions
DCA_DE_000151/10-2013, WS200, Bosch Rexroth AG
13/92