Table of Contents
Advertisement
10/64
General notes regarding damage to property and the product
During cleaning
Bosch Rexroth AG, Material and information fl ow technology: HQ 2/C-H, HQ 4, 3 842 358 792/2016-12
2.7 Personal protective equipment
• Wear appropriate protective clothing when handling the product (e.g., safety
shoes, close-fi tting clothing, a hair net for long, loose hair).
As the system user or operator, you are personally responsible for ensuring the use
of appropriate protective equipment when the product is used.
All components of the personal protective equipment must be intact.
2.8 Operator's obligations
• Before fi rst use or re-commissioning of a conveyor system, run a risk assessment in
accordance with DIN EN ISO 12100.
• Please also refer to the residual risks of the individual components (see the section 8.2
"Residual risks" on page 38).
• Before initial commissioning, make sure there are no protruding or sharp-edged
parts that may be a hazard to personnel working or moving in the area.
• Provide safety-related instructions to the operating personnel before initial start-up
or re-commissioning, and then in regular intervals.
3 General notes regarding damage to
property and the product
The warranty only applies to the delivered confi guration.
• The warranty is void in the event of faulty installation, commissioning and
operation, as well as improper use and/or improper handling.
• Prevent cleaning agents from getting into the system.
• Never use solvents or aggressive cleaning agents.
• Do not use a high-pressure cleaner for cleaning.
Advertisement
Table of Contents
