P/T Distributor - Bosch Rexroth WS200 Operating Instructions Manual

24/92 Information on this product
5.5
The P/T distributor provides the hydraulic connections for the workplace. The
P/T distributor is directly connected to the hydraulic power unit via two hydraulic hose
lines. For the training set-up, two coupling connectors for the hydraulic oil supply and two
coupling connectors for the connection to the tank are available. Thanks to the integrated
pressure relief valve, the system pressure required for the relevant training set-up can be
individually set.
For the control of the system pressure, a measuring coupling is installed. The coupling
thread of the measuring coupling corresponds to the standard DIN ISO 15171-2 –
size M16x2. The design of the measuring coupling also allows for coupling under pressure.
The P/T distributor is mounted at the central cross member of the base frame.
1
1.1
2
3
4
4.1
Fig. 10: P/T distributor
Fig. 11: Circuit schematic P/T distributor
Bosch Rexroth AG, WS200, DCA_DE_000151/10-2013

P/T distributor

Coupling connector port P
Coupling connector port P
Pressure line connection
Connection of the line to the tank
Coupling connector port T
Coupling connector port T
5 Pressure relief valve
6 Measuring line connection
7 P/T distributor housing
8 Mounting kit for assembly at the base frame