Table of Contents
Advertisement
18/92
Information on this product
5 Information on this product
5.1
The WS200 work station allows for the realization of training set-ups from the area of
hydraulics, pneumatics and automation technology. For this purpose, complementary
device sets with corresponding project manuals are available.
The WS200 work station can be used on both sides. If two grids or one grooved plate are/is
used, two workplaces for the training set-up are thus available.
The work station also offers extension possibilities with regard to the space required by
the training area. A connection kit allows for the coupling of two work stations; in this way,
the space of the training area is doubled.
Due to the small dimensions, it is perfectly suited as entry-level package for the world of
hydraulics and pneumatics. All this turns the WS200 work station into a complete,
customer-specific training and further education system with practical orientation.
5.2
1
2
3
4
5
Fig. 4: Configured WS200 work station for 2 workplaces (with grooved plate)
Bosch Rexroth AG, WS200, DCA_DE_000151/10-2013
General information
Product description
Base frame with transport rollers
Grid frame
Grooved plate
Connection kit
P/T distributor
x section
6
Tray
7
Hose holder (accessory)
8
Hydraulic power unit in duplicate with one control
box each
Advertisement
Table of Contents
Troubleshooting
