10/92
Safety instructions
• Any work to be carried out with regard to pneumatic components may only be performed
by specialist personnel having special knowledge and experience in pneumatics. Special
knowledge of pneumatics means that the personnel have to be able to read and
completely understand pneumatic plans. In particular completely understand the
correlations regarding the installed safety equipment and have knowledge of the function
and set-up of pneumatic components.
Bosch Rexroth offers measures supporting the training. An overview of the training
contents is available online at:
www.boschrexroth.de/academy
2.5
• Observe the valid regulations on accident prevention and for environmental protection.
• Observe the safety regulations and provisions of the country where the product is
implemented/used.
• Exclusively use Bosch Rexroth products in good technical order and condition.
• Observe all notices on the product.
• Persons who assemble, operate, disassemble or maintain Bosch Rexroth products must
not consume any alcohol, drugs or medication that may affect their ability to react.
• Only use accessories and spare parts approved by the manufacturer in order to exclude
hazards to persons due to unsuitable spare parts.
• Comply with the technical data and environmental conditions specified in the
product documentation.
• The installation or use of inappropriate products in safety-relevant applications could
result in unintended operating conditions when being used which in turn could cause
personal injuries and/or damage to property. Therefore please only use a product for
safety-relevant applications if this use is expressly specified and permitted in the
documentation of the product.
Bosch Rexroth AG, WS200, DCA_DE_000151/10-2013
General safety instructions