Related Manuals for Bosch rexroth COIL D36
Summary of Contents for Bosch rexroth COIL D36
- Page 1 Technical user manual COIL D36 R901440933 - R901440934 - R901394229 - R901394231 RE 18324-42/2023-02-17, EN...
- Page 2 Oil Control S.p.A. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. The data specifi ed within only serves to describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information.
-
Page 3: Table Of Contents
Technical Standards ..................7 Description of operating principle ..............7 Intended use ....................8 Technical data ....................8 DIN 43560 connector ..................8 Assembly and installation ................9 Assembly information ..................9 Maintenance ....................9 Removal, deactivation, and scrapping ............9 RE 18324-42/2023-02-17, Bosch Rexroth AG... -
Page 4: General Precautions And Conformity
This manual is to be used as an aid for installation and operation of the product and it supports technical personnel in all operating and maintenance activities. This manual also has the purpose of preventing potential health and safety hazards aff ecting the user and other persons. Bosch Rexroth AG, RE 18324-42/2023-02-17... -
Page 5: Safety
▶ Do not use commercial devices for purposes other than those intended by the manufacturer. ▶ Do not carry out maintenance tasks without fi rst appropriately selecting the coil power supplies. ▶ Do not use the device in the absence of short-circuit protection. RE 18324-42/2023-02-17, Bosch Rexroth AG... -
Page 6: Improper Use And Precautions
▶ If the connector is immersed in liquid it will be damaged resulting in incorrect operation of the coil. ▶ If the machine manufacturer has not created a protection system, we recommend installing a fuse up-line from the coil rated at double the maximum current value the coil is designed to withstand. Bosch Rexroth AG, RE 18324-42/2023-02-17... -
Page 7: Product Overview
▶ EN 60068-2-30 ▶ EN IEC 60947-1 The following technical standard was applied for validation of the coils: ▶ RNI 50113, Bosch Rexroth Norm The machine described in this instruction manual falls within the scope of the WEEE Directive. Figure 1 - WEEE Directive 3.3 Description of operating principle... -
Page 8: Intended Use
9625-320da5f16d96 3.6 DIN 43560 connector Figure 2 - DIN 43560 connector, male connector (viewed from coil). ▶ PIN1 = Power supply (+) ▶ PIN2 = Power supply (-) ▶ PIN3 = Not used ▶ PIN4 = Ground (GND) Bosch Rexroth AG, RE 18324-42/2023-02-17... -
Page 9: Assembly And Installation
fi breglass fi llers (PA66GF12 and PA66GF35). For recycling or disposal of the materials, refer to the national laws and regional regulations in force concerning the disposal of solid industrial waste and hazardous substances. RE 18324-42/2023-02-17, Bosch Rexroth AG... - Page 10 Bosch Rexroth Oil Control S.p.A. Via Leonardo da Vinci 5 P.O. Box no. 5 41015 Nonantola – Modena, Italy Tel. +39 059 887 611 Fax +39 059 547 848 compact-hydraulics-pib@boschrexroth.com www.boschrexroth.com/compacthydraulics Your local contact person can be found at: https://addresses.boschrexroth.com Subject to change RE 18324-42/2023-02-17...