Table of Contents
Advertisement
10/56
General information regarding damage to property and the product
During maintenance
and repair
During disposal
While cleaning
Bosch Rexroth AG, MIT: HD 2/H, 3 842 358 796/2015-01
• Make sure that the access to maintenance and inspection points are free of
obstacles.
• Perform the prescribed maintenance work at the intervals prescribed in
chapter 10.3 Maintenance.
• Make sure that no lines, connections and components are loose while the system is
under pressure and tension. Secure the system against restarting.
• Dispose of the product in accordance with the national laws of your country.
2.7 Personal protective equipment
• Appropriate protective clothing is to be worn when handling the product
(e.g. safety shoes, close-fi tting clothing, a hair net for long, loose hair).
As an operator or end user, you are responsible for wearing appropriate protective
equipment when handling the product.
All parts of your personal protective equipment must be intact.
2.8 Responsibilities of the end user
• Before fi rst use or re-commissioning of a conveyor system, run a risk assessment in
accordance with DIN EN ISO 12100.
• Please also refer to the further risks of the individual components (see chapter 8.2
"Further risks" on page 36).
• Before initial commissioning ensure that there are no protruding or sharp-edged
parts that may endanger personnel working or moving in the area.
• Provide safety-related instructions to the operating personnel before fi rst use or
re-commissioning, and then in regular intervals.
3 General information regarding damage to
property and the product
The warranty only applies to the delivered confi guration.
• The warranty is void in case of faulty installation, commissioning and operation, as
well as improper use and / or improper handling.
• Avoid the penetration of detergent into the system.
• Never use solvents or aggressive cleaning agents.
• When cleaning, do not use high-pressure washers.
Advertisement
Table of Contents
