Technical Data And Dimensions; Technical Data - Bosch Rexroth WS200 Operating Instructions Manual

82/92

Technical data and dimensions

13 Technical data and dimensions

13.1 Technical data

Table 39: Technical data of the WS200
Denomination
Total weight (varies depending on the equipment
type) without hydraulic fluid, device kit and
attachment parts
Dimensions
Operating temperature**
Ambient temperature for the operation*
Relative air humidity for the operation
Place of installation
Pneumatics
Hydraulics
Mains
connection
A-rated continuous sound pressure level
(at the workplace of the operating personnel –
during displacement)
* Depending on the hydraulic fluid used
** You may only use hydraulic fluids which are suitable for Rexroth components. An overview
is contained in data sheet RE 90220-01.
*** The maximum system pressure results from the training set-up. Due to pressure
intensification of a hydraulic cylinder, it may be higher than the operating pressure set
using the pressure relief valve (at the P/T distributor).
Detailed information on the viscosity temperature behavior of hydraulic fluids is contained in
the data sheet RE 90220 in chap. 3 "Hydraulic fluid selection".
For details on where the data sheets are available, please refer to chap. 1.2. in
this documentation.
Bosch Rexroth AG, WS200, DCA_DE_000151/10-2013
Length max.
Width max.
Height max.
Max. operating pressure
Max. operating pressure
Max. admissible system pressure***
Safety pressure of the hydraulic
power unit
Tank volume
Oil type (DIN 51524)**
Viscosity
Cleanliness (ISO 4406)
Flow
Displacement
Connection/operating voltage
Frequency
Nominal power
Fuse
Protective earthing
Unit Value
kg Approx. 50 to 100
mm 800
mm 800
mm 1750
°C –15 to 80
°C –15 to 40
% 5 to 80, not condensing
In weather-protected areas
bar 6
bar 60
bar 120
bar 70
l Max. 6.2
Recommended HLP VG22
cSt 15 to 120
Class At least 20/18/15
l/min 2.3 (at 1450 1/min)
ccm/rotation 1.6
V AC 230
Hz 50-60
kW 0.55
A 16
PE (zero or
FI circuit breaker)
dB (A) < 57