Table of Contents
Advertisement
1
About this documentation
1.1
Validity of the documentation
This documentation describes the configurable WS200 work station. The equipment of
the work station is configurable. Here, a hydraulic or pneumatic form is possible or
a combination of both forms.
This documentation is intended for assemblers, operators, service engineers and the
system end-user.
This documentation contains important information on the safe and proper assembly,
transport, commissioning, operation, use, maintenance, disassembly and simple
troubleshooting of the product.
You should read this documentation thoroughly, and in particular the chapter "Safety
instructions" before working with the product.
1.2
Necessary and amending documentation
The product must not be commissioned until you have been provided with the
documentation marked with the book symbol
and observed it.
Table 1: Necessary and amending documentation
Title
"Hydraulic fluids on mineral oil basis
and related hydrocarbons"
"Hydraulic fluids on mineral oil basis for
axial piston units"
Basic hydraulics compact knowledge
Hose lines, dimensions, requirements
You can find these operating instructions as well as the related documents and data sheets
in the Bosch Rexroth media directory at:
www.boschrexroth.com/various/utilities/mediadirectory/
The current training offer and other knowledge products of the Drive & Control Academy
are available on the Internet at:
www.boschrexroth.de/academy
About this documentation
(see table 1) and you have understood
Document number
RE 90220
RE 90220-01
DIN 20066
DCA_DE_000151/10-2013, WS200, Bosch Rexroth AG
5/92
Document type
Data sheet
Data sheet
Technical book
German standard
Advertisement
Table of Contents
Troubleshooting
