Intended Use; Improper Use - Bosch Rexroth WS200 Operating Instructions Manual

8/92 Safety instructions
2.2
The WS200 work station is a hydraulic, pneumatic and electric system.
It may only be used to impart knowledge and skills in the technical training and further
education in the field of hydraulics, pneumatics as well as control technology and
control engineering.
For the set-up of control circuits and simulations, only the devices and device sets
approved for the WS200 work station may be used.
The operation is only admissible under the operating conditions indicated in chapter 9.
The product is only intended for academic and industrial use and not for private use.
Intended use also includes having read and understood this documentation completely,
especially chapter 2 "Safety instructions" and chapter 3 "General information on damage to
property and damage to the product".
2.3
Any use deviating from the intended use is improper and thus inadmissible.
The installation or use of inappropriate products in safety-relevant applications could result
in unintended operating conditions when being used which in turn could cause personal
injuries and/or damage to property. Therefore please only use a product for safety-relevant
applications if this use is expressly specified and permitted in the documentation of the
product. For example, in explosion-protected areas or in safety-related parts of control
systems (functional safety).
Bosch Rexroth AG does not assume any liability for damage caused by improper use.
The user assumes all risks involved with improper use.
In particular, improper use of the product includes:
using the WS200 in a non-professional way and playing with it during the practical
•
exercises and outside the training sessions,
using other devices and device sets than those approved for the WS200.
•
Bosch Rexroth AG, WS200, DCA_DE_000151/10-2013

Intended use

Improper use