Table of Contents
Advertisement
2.7
Personal protective equipment
Use suitable protective equipment (e.g. safety goggles, safety shoes, protective
gloves) during any work (e.g. installation, repair, maintenance) on the self-con-
tained axis.
All parts of the protective equipment have to be fully functional.
2.8
Obligations of the machine end-user
The machine end-user of the self-contained axis is responsible for ensuring that
● the self-contained axis is only used according to the intended use as defined
● the self-contained axis is only stored, operated and maintained according to
● the operating personnel are instructed at regular intervals.
● a danger zone is marked, if required.
● the safety measures for the specific area of application of the self-contained
● the maintenance activities according to the maintenance schedule are
● there is no increased levels of EMC interference at the place of use in
IT security
The operation of installations, systems and machines basically requires the
implementation of a holistic IT security concept which is state-of-the-art in
terms of technology. Accordingly, Bosch Rexroth products and their properties
have to be considered as components of installations, systems and machines
RE62290-B, 05.22
Danger due to magnetic and electro-magnetic fields in
WARNING
the area of the self-contained axis! Magnetic and electro-
magnetic fields existing in the direct vicinity of electric
equipment may represent a serious danger to persons
with heart pacemakers, metal implants and hearing aids.
−
If it is necessary for somebody with a pacemaker to
enter such an area, a doctor must be consulted prior
to doing so. The interference resistance of implanted
heart pacemakers can vary greatly; there are conse-
quently no generally valid rules.
−
Persons with metal implants or metal splinters, as
well as with hearing aids, must consult a doctor
before they enter these kinds of areas.
Uncontrolled system behavior! Risk of injury! The mal-
CAUTION
function of individual components may lead to malfunc-
tions of the assembly which results in unexpected
behavior!
−
Immediately have defective components exchanged.
Improperly laid lines and cables! Risk of injury!
CAUTION
−
Lay cables and lines so that no-one can trip over
them.
−
Lay cables and lines so that they cannot be damaged
by inflection or shearing.
−
Lay cables and lines so that their insulation cannot
be damaged by severe heat.
in these operating instructions.
the specified operating and ambient conditions, in particular that the stated
limit values are not exceeded.
axis are complied with.
adhered to.
accordance with EMC directive 2014/30/EU.
Self-contained axis
Obligations of the machine end-user
13 / 60
Bosch Rexroth AG
Advertisement
Table of Contents
