External And Fan Tray Cooling Options [-C0/-C1/-C2 Option]; Figure 2-44: Location Of The Rear Fan And Air Flow; Figure 2-45: -C0 Fan Location And Direction Of Air Flow - Aerotech XR3 Hardware Manual

XR3 Hardware Manual
2.13. External and Fan Tray Cooling Options [-C0/-C1/-C2 Option]
WARNING: To prevent the XR3 from over-heating, do not obstruct the airflow path at the
perforated covers on the chassis.
The XR3 has a standard rear fan on all models. The fan pulls air into the chassis. Refer to
Built In Cooling [-C0]
Built-in fans pull cooling air from the left side through the amplifier compartment. Refer to
Figure 2-45:
www.aerotech.com
Figure 2-44: Location of the Rear Fan and Air Flow
-C0 Fan Location and Direction of Air Flow
Chapter 2: Installation and Configuration
Figure 2-44.
Figure 2-45.
81