Mechanical Specifications; Mounting And Cooling; Table 1-3: Mounting Specifications - Aerotech Automation1 SI4 Series Hardware Manual

1.2. Mechanical Specifications

1.2. Mechanical Specifications

1.2.1. Mounting and Cooling

Install the SI4 in an IP54 compliant enclosure to comply with safety standards. Make sure that there is
sufficient clearance surrounding the drive for free airflow and for the cables and connections.
Table 1-3: Mounting Specifications
Customer-Supplied Enclosure
Weight
Mounting Hardware
Mounting Orientation
Dimensions
Minimum Clearance
Minimum Airflow
(over the drive)
Operating Temperature
18
refer to
Standard
OEM
Standard M4 [#8] screws (four locations, not included)
OEM M3 screws and M3 standoffs (seven locations)
Airflow
Connectors
Standard
OEM
Section 1.3. Environmental Specifications
Refer to
SI4
IP54 Compliant
For DIN Rail Mounting,
Section 1.2.3. DIN Rail Mounting
~0.59 kg
~0.23 kg
Vertical (typical)
Section 1.2.2. Dimensions
Refer to
~25 mm
~100 mm
Provided by internal fan
4.2 CMF (NOTE: Customer Supplied)
SI4 Hardware Manual
www.aerotech.com