Table of Contents
Advertisement
XR3 Hardware Manual
Chapter 2: Installation and Configuration
2.1. Unpacking the Chassis
Visually inspect the container of the XR3 for any evidence of shipping damage. If any damage exists, notify
the shipping carrier immediately.
DANGER: All electronic equipment and instrumentation is wrapped in antistatic material and
packaged with desiccant. Ensure that the antistatic material is not damaged during unpacking.
Remove the packing list from the XR3 container. Make sure that all the items specified on the packing list
are contained within the package.
DANGER: Cables should not be connected to or disconnected from the XR3 drive chassis while
power is applied, nor should any drive modules be removed or inserted into it with power applied.
Doing so may cause damage to the system or its components.
Also provided with the XR3 is a documentation package on the installation device, containing manuals,
interconnection drawings, and other documentation pertaining to the XR3 system. This information should
be saved for future reference. Additional information about the XR3 system is provided on the Serial and
Power labels that are placed on the XR3 chassis.
The system serial number label contains important information such as the:
Customer order number (please provide this number when requesting product support)
l
Drawing number
l
System part number
l
The XR3 power label contains the factory configured AC power requirements.
DANGER: The AC power label must be changed if the AC Input Voltage is reconfigured.
www.aerotech.com
Chapter 2: Installation and Configuration
29
Advertisement
Table of Contents
