Pso Ttl Outputs; Figure 2-27: Pso Ttl Outputs Schematic; Table 2-22: Pso Ttl Outputs Specification; Table 2-23: Ttl Output Pins On The Pso Connector - Aerotech XR3 Hardware Manual

XR3 Hardware Manual
2.5.2. PSO TTL Outputs
This output signal is a 5V TTL signal which is used to drive an opto coupler or general purpose TTL input.
The TTL PSO outputs are active high and designed to drive a 50 Ω minimum load.
Table 2-22: PSO TTL Outputs Specification
Specification
Outputs (TTL)
Table 2-23: TTL Output Pins on the PSO Connector
Pin # Description
8 PSO Output 2 (5 V TTL)
9 Ground
10 PSO Output 1 (5 V TTL)
11 Ground
12 Ground
13 PSO Output 0 (5 V TTL)
www.aerotech.com
Chapter 2: Installation and Configuration
Figure 2-27: PSO TTL Outputs Schematic
Value
5 V, 50 mA
In/Out/Bi
Output
Output
Output
Output
Output
Output
57