Table of Contents
Advertisement
Successfully add a route
OPCOM3100(config)# show ip route
ROUTE NET TABLE
destination
--------------------------------------------------------------------------
192.168.2.0
192.168.4.0
--------------------------------------------------------------------------
ROUTE HOST TABLE
destination
--------------------------------------------------------------------------
127.0.0.1
--------------------------------------------------------------------------
5.4 Configure SNMP COMMUNITY table
Command
config
snmp
COMMUNITYNAME
RW]
exit
show snmp-server community
Using no snmp-server community COMMUNITYNAME to delete one COMMUNITY
in global configuration mode
For example: add a COMMUNITY named raisecom that can be both read and
written
OPCOM3100# config
Configuration mode, one command input per time. End with CTRL
OPCOM3100(config)# snmp community raisecom rw
Set snmp community name successfully
OPCOM3100(config)# exit
OPCOM3100# show snmp community
ID
COMMUNITYNAME
------------------------------
1
public
2
private
3
raisecom
gateway
192.168.4.250
192.168.4.28
gateway
127.0.0.1
Description
Enter global configuration mode
community
Add one COMMUNITY
[RO
|
COMMUNITYNAME
COMMUNITUY
RO
RW
Exit
privileged mode
Show COMMUNITY table
RIGHT
ro
rw
rw
Raisecom Technology Co., Ltd
proto
Interface
static
sng0
connect
sng0
proto
Interface
connect
lo0
from
global
configuration
15
name
of
the
read only
both read and write
made
to
Advertisement
Table of Contents
