Vehicle Transport Using The Tie-Down Loops - JLG 10MSP Operation And Safety Manual

Vehicle Transport Using the Tie-Down Loops

With the machine on the transport vehicle in position to be tied
down and machine powered down (brakes engaged), use the
following guidelines for restraining the machine during trans-
port.
USE OF EXCESSIVE FORCE WHEN SECURING MACHINE (WHEEL LOAD) CAN
CAUSE DAMAGE TO THE MACHINES REAR DRIVE OR FRONT CASTER WHEEL
COMPONENTS.
1.
Secure machine to the transport vehicle with ade-
quate chains or straps attached through the tie down
loops located at the front and rear of machine.
31215821
SECTION 3 - MACHINE OPERATION
Figure 3-17. Front and Rear Tie-Down Loop
1. Front Tie-Down Loop 2. Rear Tie-Down Loop
3-37