Section 3. Machine Operation; General; Machine Description - JLG 10MSP Operation And Safety Manual

3.1

GENERAL

THE MANUFACTURER HAS NO DIRECT CONTROL OVER MACHINE APPLICA-
TION AND OPERATION. THE USER AND OPERATOR ARE RESPONSIBLE FOR
CONFORMING WITH GOOD SAFETY PRACTICES.
This section provides the necessary information needed to
understand control function and operation.
31215821

SECTION 3. MACHINE OPERATION

3.2
This machine is a Mobile Elevating Work Platform (MEWP) with
attached adjustable material handling tray, mounted to an ele-
vating mast mechanism. The personnel lift's intended purpose
is to provide personnel access to areas above ground level to
allow placing and removing of stock from storage or display
areas.
The primary control console is located in the platform. From the
Platform Control Console the operator can drive the machine
and raise or lower the platform. The machine can be driven on a
smooth, firm surface within the limits of the maximum operat-
ing slope from an elevated platform position. Additionally, oper-
ators can activate the material Power Tray (if equipped) and
horn.
The Ground Control Station is to be used during machine
power-up, maintenance, function checks, or in case of emer-
gency, should the operator in the platform be unable to lower
the platform.
SECTION 3 - MACHINE OPERATION

MACHINE DESCRIPTION

3-1