SECTION 3 - MACHINE OPERATION
3.13 TRANSPORTING, LIFTING AND TIE-DOWN
PROCEDURES
General
This machine may be transported to a work site using the fol-
lowing methods:
• Driven around on its base wheels if travel surface area per-
mits.
• Moved with a forklift truck using the forklift pockets in the
base frame.
• Loaded onto a transport vehicle and driven to the work site,
when equipped with Front and Rear Tie-Down Loop.
Forklift Truck Transport
This machine is equipped with forklift pockets running cross-
ways under the base frame. This allows the machine to be either
transported around a work area or lifted onto a higher level
using a standard forklift truck.
NOTE: Forklift trucks must be capable of handling the gross
weight of the machine, refer to the Operating Specifica-
tions table in Section 6.
3-36
1
Figure 3-16. Forklift Truck Lifting Pockets
1. Forklift Pockets
31215821