Entering Password; Programming Mode Selection - JLG 10MSP Operation And Safety Manual

Entering Password

Entering Password (33271)
1. The Brake Release button (1) moves the box (around digit) from left to right to
select which digit to change.
2. Platform UP button (2) increases the numerical digit.
3. Platform DOWN button (3) decreases the numerical digit.
4. Change all five digits (4) to match password level, then press the Brake Release
button (1) again.
31215821
SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE

Programming Mode Selection

Programming Mode Selection
1. Use Platform UP/DOWN buttons (1) to move the selection box (2) up or down
to select item to program.
2. Press the Brake Release button (3) to enter selected mode then move on to
Selecting Programmable Item to Adjust.
6-17