Manual Tray Height Adjustment - JLG 10MSP Operation And Safety Manual

Manual Tray Height Adjustment

The manual tray is designed to carry up to 254 lb (115 kg) of
weight. It can be quickly raised or lowered vertically on the front
of the mast assembly using the tray handle release.
REMOVE ALL WEIGHT FROM THE TRAY BEFORE ENGAGING THE TRAY RELEASE
BAR TO LOWER OR RAISE THE TRAY.
To Lower Or Raise the Tray:
1. In the slot opening at the top rear of the tray, grasp the
tray lifting handle to support the tray while adjusting.
2.
Squeeze the tray release rod and raise the tray slightly
until the locking pins have disengaged from the
detent slots.
3.
Lower or raise the tray. When desired tray height is
achieved, release the tray release rod. Be certain the
locking pins at both ends of the release rod are
engaged in the detent slots before letting go of the
tray lifting handle.
31215821
SECTION 3 - MACHINE OPERATION
Figure 3-13. Manual Tray Height Adjustment
1. Tray Lifting Handle
2. Tray Release Rod
3. Locking Pins
4. Lock Pin Detent Slots
(Five Level Settings)
5. Tray Stops
3-33