Parking And Storage; Vehicle Transport - JLG LiftPod FT70 Operation, Safety, Service And Maintenance Manual

Parking and Storage

• Move machine to a dry, well-protected and well-venti-
lated area out of direct sunlight.
• Ensure the platform is fully lowered. If installed, move
the powerpack's emergency stop/shut-down switch to
the set (OFF) position.
• If necessary, remove the cordless drill or optional pow-
erpack from the platform to prevent unauthorized use.
• (FT70) - Ensure the swivel castor is retracted and the
machine is resting on the adjustable feet.
(FT140) - Set one or both caster wheel brake(s).
NOTICE
DO NOT STORE IN LOCATIONS WHERE THE MACHINE MAY ACCUMULATE ICE,
GREASE OR AIRBOURNE DEBRIS.
3121296

Vehicle Transport

When transporting the machine by vehicle, it should be disas-
sembled into its major components (see Figure 3-1. and Figure 3-
2.). Restrain each component of the machine securely during
transport.
FT70 Model: Ensure the swivel castor is retracted into the base
frame.
USE OF EXCESSIVE FORCE WHEN SECURING MACHINE CAN CAUSE DAMAGE TO
THE MACHINE.
Secure machine to the transport vehicle with adequately rated
rope or straps. Do not overtension such devices and place a buf-
fer between the device and any part of the machine.
LIFTPOD by JLG
SECTION 3 - MACHINE OPERATION
NOTICE
3-21