Battery Hazards - JLG 10MSP Operation And Safety Manual

SECTION 1 - SAFETY PRECAUTIONS
• Use only replacement parts or components that are
approved by JLG. To be considered approved, replace-
ment parts or components must be identical or equiva-
lent to original parts or components.
• Never attempt to move heavy parts without the aid of a
mechanical device. Do not allow heavy objects to rest in
an unstable position. Ensure adequate support is pro-
vided when raising components of the machine.
• Use only approved non-flammable cleaning solvents.
• Do not replace items critical to stability, such as batter-
ies or solid tires, with items of different weight or specifi-
cation. Do not modify the MEWP in any way to affect
stability.
• Refer to the Service and Maintenance Manual for the
weights of critical stability items.
MODIFICATION OR ALTERATION OF A MEWP SHALL BE MADE ONLY WITH PRIOR WRIT-
TEN PERMISSION FROM THE MANUFACTURER.
1-12

Battery Hazards

• Always disconnect batteries when servicing electrical
components or when performing welding on the
machine.
• Do not allow smoking, open flame, or sparks near bat-
tery during charging or servicing.
• Do not contact tools or other metal objects across the
battery terminals.
• Always wear hand, eye, and face protection when ser-
vicing batteries. Ensure that battery acid does not come
in contact with skin or clothing.
BATTERY FLUID IS HIGHLY CORROSIVE. AVOID CONTACT WITH SKIN AND
CLOTHING AT ALL TIMES. IMMEDIATELY RINSE ANY CONTACTED AREA WITH
CLEAN WATER AND SEEK MEDICAL ATTENTION.
• Charge batteries only in a well ventilated area.
• Avoid overfilling the battery fluid level. Add distilled
water to batteries only after the batteries are fully
charged.
31215821