Walk-Around Inspection - JLG 10MSP Operation And Safety Manual

2.4

WALK-AROUND INSPECTION

Begin the Walk-Around Inspection at item one as noted on Fig-
ure 2-1. Continue around machine checking each item in
sequence for the conditions listed in the following check list.
31215821
SECTION 2 - PREPARATION AND INSPECTION
TO AVOID POSSIBLE INJURY, BE SURE MACHINE POWER IS "OFF" DURING
WALK-AROUND INSPECTION.
DO NOT OPERATE MACHINE UNTIL ALL MALFUNCTIONS HAVE BEEN COR-
RECTED.
DO NOT OVERLOOK VISUAL INSPECTION OF THE BASE FRAME UNDERSIDE.
CHECK THIS AREA FOR OBJECTS OR DEBRIS WHICH COULD CAUSE EXTENSIVE
MACHINE DAMAGE.
2-5