JLG 10MSP Operation And Safety Manual page 32

SECTION 2 - PREPARATION AND INSPECTION
3.
Ensure the Object Detection System (if equipped)
functions properly (refer to Section 3):
• Raise the platform to a height of 24 in (61 cm)
or more.
• Have someone on the ground place an object
of 15 lb (7 kg) or greater on the object detec-
tion pad.
• Attempt to lower the platform. If the object
detection system is functioning properly, the
horn should sound three short blasts, and the
platform will not lower.
• Have the person on the ground remove the
weight. Reset the Object Detection System by
pressing the horn button once. The platform
lift down function should now operate.
4. Ensure the Power Tray (if equipped) functions properly
by raising and lowering the tray several times. Check
for smooth operation.
2-10 31215821