Trip And Fall Hazards - JLG 10MSP Operation And Safety Manual

Trip and Fall Hazards

• JLG recommends that the operator utilizes a fall/travel
restraint system in the platform with a lanyard attached to
an authorized lanyard anchorage point. For further infor-
mation regarding fall protection requirements on JLG prod-
ucts, contact JLG.
• Before operating the machine, make sure all railing and
gates are fastened in their proper position.
31215821
SECTION 1 - SAFETY PRECAUTIONS
• Keep both feet firmly positioned on the platform floor at all
times. Never use ladders, boxes, steps, planks, or similar
items on platform to provide additional reach.
• Never use the mast assembly to enter or leave the platform.
• Use extreme caution when entering or leaving platform.
Ensure that the mast assembly is fully lowered. Face the
platform when entering or leaving the platform. Always
maintain "three point contact" with the machine, using two
hands and one foot or two feet and one hand at all times
during entry and exit.
1-5