JLG 10MSP Operation And Safety Manual page 50

PLATFORM
FAULT
LCD SYMBOL SCREEN
LEDs
CODE
FLASHING
6 8
13 6
00000.0
17 7
00000.0
32 7
00000.0
34 —
35 —
31215821
Table 3-2. LCD Display - Operating Fault Conditions (Continued)
LCD TEXT SCREEN
1 3
1 7
32
SECTION 3 - MACHINE OPERATION
FAULT DESCRIPTION/
MACHINE CONDITION
Drive Motor Brush Wear Warning
(Counts down 25 hrs. of DRIVE opera-
tion remaining to a 10 sec. shut down
mode)
Traction Module Over Temperature
(DRIVE Disabled)
13
Ground Control Module Over Tem-
perature (Machine Stopped)
1 7
Pump Motor Over Current
(LIFT UP Disabled)
32
Aux. #1 - Left Hand Enable Open
Aux. #1 - Left Hand Enable depressed
during Machine Power-up
TO CORRECT PROBLEM
Drive Motor Brushes Require Service
Replacement -
(See Section 6.7 on page 6-19 for fur-
ther Instructions)
Allow Drive System Traction Module
to Cool Before Operating (Caused by
extreme temperature)
Allow Ground Control Module to Cool
Before Operating -
(Caused by extreme temperature)
Platform Load Over Capacity
Press on Left Hand Enable during
machine operation
Do Not Press on Left Hand Enable
during Machine Power-Up
3-17