Trip And Fall Hazards - JLG LIFTLUX 210-25 Operation And Safety Manual

SECTION 1 - SAFETY PRECAUTIONS
• Always ensure that power tools are properly stowed and
never left hanging by their cord from the platform work
area.
• Do not assist a stuck or disabled machine by pushing or
pulling except by pulling at the chassis tie-down lugs.
• Stow scissor arm assembly and shut off all power before
leaving machine.
1-4

Trip and Fall Hazards

• JLG Industries, Inc. recommends that all persons in the
platform wear a full body harness with a lanyard attached
to an authorized lanyard anchorage point while operating
this machine. For further information regarding fall protec-
tion requirements on JLG products, contact JLG Indus-
tries, Inc.
• Prior to operation, ensure all gates and rails are fastened
and secured in their proper position. Identify the desig-
nated lanyard anchorage point(s) at the platform and
securely attach the lanyard. Attach only one (1) lanyard
per lanyard anchorage point.
– JLG Lift – 3121303