Firmware - Extron electronics SSP 200 User Manual

Firmware

The Firmware panel (see figure 63,
version and when it was last updated to the device (see figure 69,
Figure 69.
NOTE: The latest firmware can be downloaded from the Extron
Downloading the SSP 200 Firmware
To update the SSP 200 firmware version:
1. Before starting, download the latest version of the firmware to your PC (see the note
above).
2. An executable (.exe) file is downloaded to the PC. Run this program to place the
firmware on the PC for future use. Make a note of the folder where the firmware file was
saved.
ATTENTION:
•
•
On the Firmware panel, click Select File (see figure 69,
3.
window on your PC.
4. Browse to the location of the firmware and select the file (see figure 70).
Figure 70.
8
Firmware Panel
The extension of the firmware file must be .eff. Opening a file with an incorrect
extension may cause the device to stop functioning.
L'extension du fichier firmware doit être .eff. Si un fichier est ouvert avec une
mauvaise extension, l'appareil peut arrêter de fonctionner.
Selecting the Firmware File
, on page 81) displays the current firmware
1
website
on page 58).
). This opens an Explorer
2
SSP 200 • Internal Web Page
).
(see
86