General Settings - Extron electronics SSP 200 User Manual

General Settings

General Settings
Click the General Settings button (see figure 26,
The General Settings panel (see figure 46) allows you to adjust:
• Dolby Settings
• DTS Settings
Dynamic Range Compression
•
• Mono Settings
• Front Panel Lockout (Executive Mode)
The General Settings panel also allows you to access:
• Hardware Settings
Communication Settings
•
Figure 46.
Dolby Settings
Depending on the listening environment, listener preference, or both, reducing the dynamic
range of an audio program may be desirable. To limit the dynamic range, Dolby TrueHD
DRC Mode applies dynamic range compression to the Dolby TrueHD audio content. When
dynamic range compression is applied, the high audio levels of content are cut (attenuated)
and the low levels are boosted (amplified).
Using the Virtualizer Mode on a Dolby signal gives you the effect of a virtual height
and surround effect from traditional speaker layouts without the use of height speakers in
systems with more than 2 channels.
(after opening the Hardware Settings panel)
General Settings
, on page 31).
3
SSP 200 • Product Configuration Software 50