Extron electronics SSP 200 User Manual page 60

Front Panel Lockout (Executive Mode)
This setting determines what functionality is available on the front of the device.
• Unlock Front Panel — Allows all of the buttons to operate normally.
Mode 1 — Removes the functionality of every button on the front of the device.
•
• Mode 2 — Limits front panel functionality to just volume control.
Mode 3 — Limits front panel functionality to just input selection.
•
Hardware Settings
Click the Hardware Settings button (see
Information, Device Name, Date and Time, and Password panels.
Unit Information
The Unit Information panel gives a non‑configurable view of information about the
figure 47
connected device (see
The following device information is displayed:
Part number
•
Model name
•
Model description
•
Firmware version
•
• Temperature (inside device)
Device name
•
DHCP status
•
IP address
•
Subnet mask
•
Default gateway address
•
DNS server
•
MAC address
•
Click Edit Communication Settings (
) to return to the General Settings panel.
panel. Click Cancel (
2
figure 46 on page 50) to access the Unit
on the next page).
) to go to the Communication Settings
1
SSP 200 • Product Configuration Software 52