I/O Panel; Input/Output Config - Extron electronics SSP 200 User Manual

Surround sound processor
Hide thumbs Also See for SSP 200:
Table of Contents

Advertisement

I/O Panel

The I/O Panel on the left side of the main window allows you to select an input and see its
current status. The fader on the bottom portion is the Main Volume. This sets the volume
level for all active speaker outputs of the SSP 200. Below the Main Volume fader is a Mute
button that mutes all active speakers (see figure 27).
The master volume can be adjusted between 0% and
100%. The current volume setting is displayed in the text
box. The volume can be changed in any of the following
ways:
Grab and drag the slider bar to adjust volume in 1%
steps.
Click the slider bar to make it active and use the up
and down arrows beside the text box to adjust the
volume in 1% steps.
Click in the text box and type a desired volume
percentage in 1% steps. Do not type the "%"
character.
Click the slider bar to make it active and use the <up
arrow> and <down arrow> keys on the keyboard to
adjust the volume in 1% steps.
Click the slider bar to make it active and use the
<Page Up> and <Page Down> keys on the keyboard
to adjust the volume in 5% steps.
The Mute button toggles between muting or unmuting all
channel outputs.
NOTES:
Switching inputs disables the mute function and
restores the volume setting.
The round indicator at Input Select buttons
1 through 4 turn green when the input selected
has an active input.
Input Select buttons 2 through 4 show EXP
if the user configures an input to be replaced.
The round indicator at the Input 5 button
turns red when the analog input signal is
clipping.

Input/Output Config

The Input/Output Configuration panel allows the user to configure the active input and
output signals (see
Input Configuration
The Input Configuration panel allows you to view the Resolution and HDCP Status of
the HDMI input and set the input to HDCP Authorized.
In addition, the panel allows you to enable and set the DMP EXP Input and adjust the gain
for Analog Input 5.
figure 28
on the next page).
SSP 200 • Product Configuration Software
Figure 27.
I/O Panel
32

Advertisement

Table of Contents
loading

Table of Contents