Device Status - Extron electronics SSP 200 User Manual

To change the device name:
1. Click into the Device Name field (see figure 64,
2.
Enter a desired name.
NOTE: The name can have alphanumeric characters and hyphens only. A hyphen
cannot be the first or last character. An incorrect name is ignored and the current
name is not changed.
3. Click SAVE (
in the Network Settings panel is also updated with the new name.
Click CANCEL (
NOTE: The default name is a combination of the model name and last three pairs of
the MAC address (for example, SSP-200-18-FF-FF).

Device Status

The Device Status panel (see figure 64,
time, and time zone for the connected SSP 200, and allows the user to either synchronize
the date and time to a connected PC or set the date and time manually.
To synchronize to the connected PC:
On the Device Status panel, click SYNC TO PC.
1.
If successful, you see a confirmation message and the current Date, Time, and
2.
Timezone on the Device Status panel.
To set the information manually:
1. Click EDIT on the Device Status panel.
The Device Status Settings dialog box appears (see figure 65).
Change Date and Time (
2.
3. Click SAVE (
update has been successful.
Click CANCEL (
Figure 65.
). The new name is applied, the dialog box closes, and the device name
2
) to exit the process without making any changes.
3
) and the Timezone (
1
) when done. You see the changes on the Device Status panel if the
3
) to exit the process without making any changes.
4
Device Status Settings
, on the previous page).
1
, on the previous page) displays the date,
2
) as appropriate.
2
SSP 200 • Internal Web Page 82