Connecting To The Usb Port - Extron electronics SSP 200 User Manual

Connecting to the USB Port

Use the USB mini‑B port on the front panel to connect the processor to a host computer to
configure the unit with PCS or SIS commands.
1.
2.
Connect a USB A to mini‑B cable between the front panel USB CONFIG port and a
USB port on the PC (see figure 14).
Mini Type B
USB
SOURCE
1
D
ATMOS
DTS DTS: X
PCM HDCP
CONFIG
2-CH EXP
e
SSP 200
Figure 14. Connecting a PC to the SSP 200 Front Panel USB Port
If this is the first time the SSP 200 has been connected to the PC, the Found New
Hardware Wizard opens (see figure 15).
The first screen offers to connect to Windows Update to search the web for the
appropriate driver needed for the USB port to communicate with the SSP 200. This is
not necessary if the USB driver is already on your PC.
Figure 15. Found New Hardware Wizard Opening Screen
Click on the appropriate radio button (see figure 15).
• Select the Yes, this time only radio button (
connect to Windows Update only this one time.
Type A
USB
USB
Ports
USB Cable
INPUT VOLUME
2 3 4 5
SSP 200
SURROUND SOUND PROCESSOR
1
2
3
4
) if you want your computer to
1
1 2 3 4
WiFi
PC
SSP 200 • Panel Features 16