Seca 360° Proximity Connection; Seca 360° Wireless Connection - Seca mVSA 535 Instructions For Use Manual

11.6 seca 360° proximity connection
Fault
Weight or height values do
not appear in the display
An error message appears
in the Weight or Height
field
11.7 seca 360° wireless connection
Fault
Weight or height values do
not appear in the display
92 •
seca mVSA 535
Cause
No connection set
seca 360° proximity
up
Network connection interrupted
seca scale/measuring rod incorrectly
configured
No measurement has yet been
performed using the seca scale/
measuring rod
seca scale/measuring rod has not
submitted a value
An error occurred on the seca scale/
measuring rod
Cause
wireless module of
seca 360° wireless
the connected scale/measuring rod not
activated
No wireless
seca 360° wireless
connection set up
Scale/measuring rod not wireless-
capable (do not contain a
wireless module)
seca 360° wireless
Remedy
Administrator:
➔
Setting up a seca 360° proximity
connection
• LAN: Ensure that the network cable is cor-
rectly plugged in and is not damaged
• WiFi: Reduce distance from router
Administrator: Configure seca scale/
measuring rod as follows:
• Scan user ID: Required
• Scan patient ID: Required
• Confirmation of measurement on seca
measuring device: Required
• Port used: Port configured for communi-
cation with the
seca connect 103
(default: 22020) ➔
Setting up a connec-
tion to the seca analytics 115 PC software
• Follow seca 103/452 system instructions
for use
Perform measurement as described in the
instructions for use for the seca scale/seca
measuring rod
Submit value as described in the
instructions for use for the seca scale/seca
measuring rod
• Eliminate error as described in the instruc-
tions for use for the seca scale/seca
measuring rod.
• Follow seca 103/452 system instructions
for use
• If you are unable to eliminate the error,
contact seca Service.
Remedy
Administrator:
➔
Setting up a seca 360° wireless
connection
Enter measured values manually:
software