Seca mVSA 535 Instructions For Use Manual page 52

52 •
seca mVSA 535
6. Push the temperature probe into the probe holder completely.
You have the following options for continuing:
► Measure further vital signs ➔
► Stop the measurement procedure ➔
procedure
Modifying presets
NOTE
Your settings apply to the current measurement procedure. If you
stop the measurement procedure ➔
dure, the presets defined by the administrator become active again.
1. Ensure that the temperature probe is pushed into the probe holder
completely.
2. Press the TEMP field.
The Temperature settings dialog window opens.
The presets are displayed.
3. Press the desired measurement method.
• Predictive
• Direct
4. Press the Confirm button.
The dialog window closes.
The modified settings are adopted.
5. Start the temperature measurement as described in the section entitled
➔
Starting a rectal temperature
You have the following options for continuing:
► Measure further vital signs ➔
► Stop the measurement procedure ➔
procedure
=>
Measuring vital signs
Stopping a measurement
Stopping a measurement proce-
measurement.
Measuring vital signs
Stopping a measurement