7. OPERATION WHEN CONNECTED TO AN EMR SYSTEM
7.1 Switching on the device
➔
Switching on the device
➔
Measuring
➔
Logging in with EMR user ID
➔
Calling up patient data from the EMR system
➔
Saving measurements in the EMR system
Your administrator can set up the device so that it communicates with your
EMR system. In this case, the following additional functions are available:
• Log in with EMR user ID
• Call up patient data from EMR system on the device
• Submit measuring results to the EMR system
NOTICE!
Faulty operation, implausible measuring results
► Connection of the device to your EMR system is based on the tech-
nical and regulatory situation in your institution. In the individual
case, this may lead to the device behaving differently to the way de-
scribed in these instructions for use. If you have any questions, con-
tact your administrator.
NOTE
To prevent faulty input, we recommend entering IDs with the aid of a
barcode scanner; information about compatible barcode scanners
can be found here: ➔
1. Ensure that a barcode scanner is connected to the free USB interface of
the device.
2. Press the ON/OFF button of the monitor.
The LED of the ON/OFF button is white.
3. Wait until the Vital signs tab is displayed:
You have the following options for continuing:
► ➔
Measuring with an active connection to an EMR system
► ➔
Measuring with an interrupted connection to an EMR system
Operation when connected to an EMR system • 69
Optional accessories and spare
English
parts.